Damper D025
Fluimac Damper D025 is a pneumatic pulsation damper installed on the delivery side of Phoenix diaphragm pumps that smooths out flow and pressure pulsations. It works actively with compressed air and a diaphragm and automatically sets the required pressure – no manual adjustment or pre-charging is needed. It reduces pulsations by 70–80% on average in applications with high back pressure, increases dosing accuracy, extends filter life and protects pipes and fittings from water hammer. The fluid connection is 1″ BSPP and the working volume is ~200 cc. It is available in the same materials as the pumps (PP, PVDF+CF, POMc, SS) and is suitable for pumps Phoenix P55, Phoenix P60, Phoenix P90, Phoenix P120. It holds an ATEX certificate for zone 2.
- Fluid connection: 1″ BSPP
- Air connection: Ø 8 mm
- Maximum air pressure: 8 bar
- Working volume: 200 CC ~
- Body materials: PP, PVDF+CF, POMc, SS
- Weight: PP – 1.75 kg, PVDF+CF – 2 kg, POMc – 1.9 kg, SS – 6.7 kg
- Temperature: PP -4 °C +65 °C, PVDF+CF -20 °C +95 °C, POMc -5 °C +80 °C, SS -20 °C +95 °C
- Suitable for pumps: Phoenix P55, Phoenix P60, Phoenix P90, Phoenix P120
- ATEX marking (gas): II 3/3 G Ex h IIC T4 Gc
- ATEX marking (dust): II 3 D Ex h IIIB T135°C Dc X
Available materials

PP
-4 °C +65 °C

PVDF+CF
-20 °C +95 °C

POMc
-5 °C +80 °C

SS
-20 °C +95 °C
| Model | Casing | Diaphragm | Connections | Inlet/outlet |
|---|---|---|---|---|
| D025 | P = PP KC = PVDF+CF O = POMc S = SS | HT = HYTREL+PTFE MT = SANTOPRENE+PTFE H = HYTREL W = SANTOPRENE H.R. D = EPDM N = NBR | 1 = BSPP 2 = FLANGE 3 = TRI-CLAMP 5 = NPT | T = STANDARD |

